TA Slider Bed Horizontal Belt Conveyor

Model TA conveyors are our most versatile slider bed conveyors. Model TA conveyors can be used in a whole bunch of applications like material handling, sorting, packing, and inspection. These conveyors set up quickly, making installation a breeze.

Series Specifications

Belting

Ultimate 140 BBS Nitrile

Drive Pulley

4″ diameter with 1″ diameter shaft at bearings or 8″ diameter with 1-3/16″ diameter shaft at bearings, machine crowned and fully lagged. 

Tail Pulley

4″ diameter with 1″ diameter shaft at bearings, machine crowned. 

Bed

4″ deep x 12 ga. formed steel slider bed, powder painted. Standard 5′ and 10′ long sections bolt together with splice plates.

End Drive

Locate don discharge end of the conveyor, chain guard on the left-hand side. 

Take-Up

Take-ups at the tail pulley, which provides 4″ of belt take-up.

Bearings

Sealed, pre-lubricated, self-aligning ball bearings on drive and tail pulleys

Snub Idler

Adjustable 2-1/8″ diameter roller for 4″ pulley; 2-1/2″ diameter for 8″ pulley. Pre-lubricated ball bearings, guards included.

Return Idlers

Adjustable 1.9″ diameter rollers, pre-lubricated ball bearings

Belt Speed

65 FPM constant, standard

Motor Drive

1/2HP – 207/230/460/575V, 3PH, 60Hz Totally Enclosed C-Face Motor

Speed Reduction

Sealed worm gear C-Face speed reducer. 

Roller Chain

No. 50 roller chain to drive pulley

External Controls

Optional

Warning

Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop-out roller (other stationary equipment will require proper guarding and safety devices supplied by others).

Technical Drawings

Share on facebook
Share on twitter
Share on linkedin
Share on email