250TB Trough Bed Belt Conveyor

Specifications:

Belting:	PVC-120 black.
Drive Pulley:	4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
Tail Pulley:	4" dia., crowned, with 1-3/16" dia. shaft.
End Drive:	Allows one-direction (unit) operation; add optional center drive for reversible application.
Take-Up:	Screw type unit at tail pulley provides 12" belt take-up.
Bearings:	All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Return Rollers:	1.9" dia. x 16 ga. steel, model 196S, adjustable.
Belt Speed:	60 FPM, constant.
Bed:	3-1/2" deep x 12 ga. box type bed with bed pan braces (all widths) and with 2-1/2" deep x 12 ga. formed trough with formed flanges on sides to provide extra strength.
Floor Supports:	SM-6 with 4" dia. end drive adjustable 31-3/4" to 40-1/4" TOB. SM-6 with 8" dia. end drive adjustable 33-3/4" to 40-1/4"TOB. Supports provided at both ends and each bed joint. Supports should be lagged to floor.
Motor Drive:	1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
Roller Chain:	Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
Electrical Controls:	Optional
	View Technical Drawing — View Catalog
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 Hour Shipments Include All 1-Foot Increments 5'- 0" TO 100'- 0"

350SB Slider Bed Belt Conveyor

Specifications:

Belting:	PVC-120 black.
Drive Pulley:	4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
Tail Pulley:	4" dia., crowned, with 1-3/16" dia. shaft.
End Drive:	Allows one-direction (unit) operation; add optional center drive for reversible application.
Take-Up:	Screw type unit at tail pulley provides 12" belt take-up.
Bearings:	All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Return Rollers:	1.9" dia. x 16 ga. steel, model 196S, adjustable.
Belt Speed:	60 FPM, constant.
Bed:	3-1/2" x 1-1/2" x 10 ga. channel frame with 14 ga. slider bed 9"-27" BF; 12 ga. bed 33" BF and above with bed pan braces.
Floor Supports:	SM-6 with 4" dia. end drive adjustable 31-3/4" to 40-1/4" TOB. SM-6 with 8" dia. end drive adjustable 33-3/4" to 40-1/4"TOB. Supports provided at both ends and each bed joint. Supports should be lagged to floor.
Motor Drive:	1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
Roller Chain:	Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
Electrical Controls:	Optional
	View Technical Drawing
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 Hour Shipments Include All 1-Foot Increments 5'- 0" TO 100'- 0"

350BSB Box Style Slider Bed Belt Conveyor

Specifications:

Belting:	PVC-120 black.
Drive Pulley:	4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
Tail Pulley:	4" dia., crowned, with 1-3/16" dia. shaft.
End Drive:	Allows one-direction (unit) operation; add optional center drive for reversible application.
Take-Up:	Screw type unit at tail pulley provides 12" belt take-up.
Bearings:	All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Return Rollers:	1.9" dia. x 16 ga. steel, model 196S, adjustable.
Belt Speed:	60 FPM, constant.
Bed:	3-5/8" deep x 12 ga. box type construction.
Floor Supports:	SM-6 with 4" dia. end drive adjustable 31-3/4" to 40-1/4" TOB. SM-6 with 8" dia. end drive adjustable 33-3/4" to 40-1/4"TOB. Supports provided at both ends and each bed joint. Supports should be lagged to floor.
Motor Drive:	1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
Roller Chain:	Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
Electrical Controls:	Optional
	View Technical Drawing
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 Hour Shipments Include All 1-Foot Increments 5'- 0" TO 100'- 0"

350BSB Box Style Slider Bed Belt Conveyor w/Round End Plates

Specifications:

Belting:	PVC-120 black.
Drive Pulley:	4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
Tail Pulley:	4" dia., crowned, with 1-3/16" dia. shaft.
End Drive:	Allows one-direction (unit) operation; add optional center drive for reversible application.
Take-Up:	Screw type unit at tail pulley provides 12" belt take-up.
Bearings:	All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Return Rollers:	1.9" dia. x 16 ga. steel, model 196S, adjustable.
Belt Speed:	60 FPM, constant.
Bed:	3-1/2" x 1-1/2" x 10 ga. channel frame with 14 ga. slider bed 9"-27" BF; 12 ga. bed 33" BF and above with bed pan braces.
Floor Supports:	SM-6 with 4" dia. end drive adjustable 31-3/4" to 40-1/4" TOB. SM-6 with 8" dia. end drive adjustable 33-3/4" to 40-1/4"TOB. Supports provided at both ends and each bed joint. Supports should be lagged to floor.
Motor Drive:	1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
Roller Chain:	Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
Electrical Controls:	Optional
	View Technical Drawing
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 Hour Shipments Include All 1-Foot Increments 5'- 0" TO 100'- 0"

196RB Medium Duty Roller Bed Belt Conveyor

Specifications:

Belting:	PVC-120 black.
Drive Pulley:	4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
Tail Pulley:	4" dia., crowned, with 1-3/16" dia. shaft.
End Drive:	Allows one-direction (unit) operation; add optional center drive for reversible application.
Take-Up:	Screw type unit at tail pulley provides 12" belt take-up.
Bearings:	All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Carrier Rollers:	1.9" dia. x 16 ga. steel rollers, model 196S.
Return Rollers:	1.9" dia. x 16 ga. steel, model 196S, adjustable.
Belt Speed:	60 FPM, constant.
Squaring Rods:	Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.
Bed:	3-1/2" x 1-1/2" x 10 ga. channel frame. Bed sections attached with couplings and floor supports.
Floor Supports:	SM-6 with 4" dia. end drive adjustable 31-3/4" to 40-1/4" TOB. SM-6 with 8" dia. end drive adjustable 33-3/4" to 40-1/4"TOB. Supports provided at both ends and each bed joint. Supports should be lagged to floor.
Motor Drive:	1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
Roller Chain:	Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
Electrical Controls:	Optional
	View Technical Drawing
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 Hour Shipments Include All 1-Foot Increments 5'- 0" TO 100'- 0"

196RBF Roller Bed Inclined Floor-To-Floor Belt Conveyor

Specifications:

Belting:	Black PVC ruff-top.
Drive Pulley:	8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
Tail Pulley:	4" dia., crowned, with 1-3/16" dia. shaft.
Center Drive:	Reversible drive with 24" integral belt take-up.
Bearings:	All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Carrier Rollers:	1.9" dia. x 16 ga. steel rollers, model 196S.
Return Rollers:	1.9" dia. x 16 ga. steel, model 196S, adjustable.
Belt Speed:	60 FPM, constant.
Bed:	3-1/2" x 1-1/2" x 10 ga. channel frame. Bed sections attached with couplings and floor supports.
Nose-Over:	Provides smooth transition from incline to horizontal position. Single nose-over adjusts 0-20°; double nose-over adjusts 0-35° (specify single or double).
Floor Supports:	Optional
Motor Drive:	1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
Roller Chain:	Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
Electrical Controls:	Optional
	View Technical Drawing
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 Hour Shipments Include All 1-Foot Increments 5'- 0" TO 100'- 0"

350SBF Slider Bed Inclined Floor-To-Floor Belt Conveyor

Specifications:

Belting:	Black PVC ruff-top.
Drive Pulley:	8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
Tail Pulley:	4" dia., crowned, with 1-3/16" dia. shaft.
Center Drive:	Reversible drive with 24" integral belt take-up.
Bearings:	All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Return Rollers:	1.9" dia. x 16 ga. steel, model 196S, adjustable.
Belt Speed:	60 FPM, constant.
Bed:	3-1/2" x 1-1/2" x 10 ga. channel frame with 14 ga. slider bed.
Nose-Over:	Provides smooth transition from incline to horizontal position. Single nose-over adjusts 0-20°; double nose-over adjusts 0-35° (specify single or double).
Floor Supports:	Optional
Motor Drive:	1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
Roller Chain:	Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
Electrical Controls:	Optional
	View Technical Drawing
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 Hour Shipments Include All 1-Foot Increments 5'- 0" TO 100'- 0"

251RB Heavy Duty Roller Bed Belt Conveyor

Specifications:

Belting:	PVC-120 black.
Drive Pulley:	8" dia. with 1-7/16" dia. shaft on 15"-39" BF; 12" dia. with 1-15/16" dia. shaft above 39" BF; both crowned and fully lagged.
Tail Pulley:	4" dia. with1-3/16" dia. shaft on 15"-39" BF; 6" dia. with 1-7/16" dia. shaft above 39" BF; both crowned.
End Drive:	Allows one-direction (unit) operation; add optional center drive for reversible application.
Take-Up:	Screw type unit at tail pulley provides 12" belt take-up.
Bearings:	All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Carrier Rollers:	2-1/2" dia. x 11 ga. steel, model 251S.
Return Rollers:	1.9" dia. x 16 ga. steel, model 196S, adjustable.
Belt Speed:	35 FPM, constant.
Bed:	4" x 1-1/2" x 7 ga. channel frame. Bed sections attach with couplings and floor supports.
Squaring Rods:	Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.
Floor Supports:	8" dia. end drive adjustable 30-1/4" to 33-1/4" TOB with SH-6 at end plates and SH-7 at intermediates. 12" dia. end drive adjustable 30-1/4" to 33-1/4" TOB with SH-5 at drive, SH-6 at take-up and SH-7 at intermediates. Supports provided on 5' centers and should be lagged to floor.
Motor Drive:	1 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
Roller Chain:	Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
Electrical Controls:	Optional
	View Technical Drawing
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 Hour Shipments Include All 1-Foot Increments 5'- 0" TO 100'- 0"