196LR Medium Duty Belt Driven Live Roller Conveyor

Specifications:

Belting:	6" wide black PVC-120 COS.
Drive Pulley:	4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
End Pulley:	4" dia., crowned, with 1-3/16" dia. shaft.
Center Drive:	Reversible drive with 24" integral belt take-up. Specify location.
Bearings:	All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Tread Rollers:	1.9" dia. x 16 ga. steel, model 196S.
Pressure Rollers:	1.9" dia. x 16 ga. steel, model 196S.
Return Rollers:	1.9" dia. x 16 ga. steel, model 196S, adjustable.
Speed:	60 FPM, constant.
Bed:	7" x 1-1/2" x 12 ga. channel frame slotted for tread rollers to pop-out. When unit is installed at 7'-0" elevation or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.
Squaring Rods:	Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.
Floor Supports:	SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor.
Motor Drive:	1/3 HP, 230/460/3,60 cycle, ODP right angle gear motor.
Roller Chain:	Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
Electrical Controls:	Optional
	View Technical Drawing
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 Hour Shipments Include All 1-Foot Increments 5'- 0" TO 100'- 0"

196CALR Medium Duty Cam Adjusted Live Roller Conveyor

Specifications:

Belting:	6" wide black PVC-120 COS.
Drive Pulley:	4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
End Pulley:	4" dia., crowned, with 1-3/16" dia. shaft.
Center Drive:	Reversible drive with 24" integral belt take-up. For units under 8'-0" overall length, drive components must be stacked. Consult factory for minimum unit elevation.
Bearings:	All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Tread Rollers:	1.9" dia. x 16 ga. steel, model 196S.
Pressure Rollers:	1.9" dia. x 16 ga. steel, model 196S, cam adjustable.
Return Rollers:	1.9" dia. x 16 ga. steel, model 196S, adjustable.
Speed:	60 FPM, constant.
Bed:	7" x 1-1/2" x 12 ga. channel frame slotted for tread rollers to pop-out. When unit is installed at 7'-0" elevation or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.
Squaring Rods:	Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.
Floor Supports:	SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor.
Motor Drive:	1/3 HP, 230/460/3,60 cycle, ODP right angle gear motor.
Roller Chain:	Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
Electrical Controls:	Optional
	View Technical Drawing — View Catalog Info
Warning: Pop-out rollers should be retained in frame if unit is elevated to 7'-0" and above.
24 Hour Shipments Include All 1-Foot Increments 6'- 0" TO 100'- 0"

251CALR Heavy Duty Cam Adjusted Live Roller Conveyor

Specifications:

Belting:	12" wide black PVC-120.
Drive Pulley:	8" dia. with 1-7/16" dia. shaft on 15"-39" BF; 12" dia. with 1-15/16" dia. shaft above 39" BF; both crowned and fully lagged.
End Pulley:	4" dia. with 1-3/16" dia. shaft on 15"-39" BF; 6" dia. with 1-7/16" dia. shaft above 39" BF; both crowned.
Center Drive:	Reversible drive with 24" integral belt take-up. Specify location. For units under 8'-0" overall length, drive components must be stacked.
Bearings:	All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Tread Rollers:	2-1/2" dia. x 11 ga. steel, model 251S.
Pressure Rollers:	1.9" dia. x 16 ga. steel, model 196S; same BF as conveyor up to 39" BF; units 43" BF and above, rollers are 21" BF with STANDARD 12" wide belt; 27" BF if OPTIONAL 24" belt is used.
Return Rollers:	1.9" dia. x 16 ga. steel, model 196S, adjustable.
Speed:	35 FPM, constant.
Bed:	7" x 1-1/2" x 10 ga. formed steel channel frame slotted for tread rollers to pop-out. When unit is installed at 7'-0" elevation or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.
Floor Supports:	8" and 12" center drive (with 4" or 6"end pulley) adjustable 33" to 36" TOR with SH-6 at end plates and SH-7 at intermediates. Supports provided on 5' centers and should be lagged to floor.
Motor Drive:	1 HP, 230/460/3,60 cycle, ODP right angle gear motor.
Roller Chain:	Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
Electrical Controls:	Optional
	View Technical Drawing — View Catalog Info
Warning: Pop-out rollers should be retained in frame if unit is elevated to 7'-0" and above.
24 Hour Shipments Include All 1-Foot Increments 6'- 0" TO 100'- 0"

196LRC Medium Duty Belt Driven Live Roller Curve Conveyor

Specifications:

Belt:	"B" section V-belt.
Tread Rollers:	2-1/2" dia. to 1-11/16" dia. x 14 ga. steel tapered rollers, model 254T; 1.9" dia. x 16 ga. steel straight tangent rollers, model 196S.
Pressure Sheaves:	Provides drive belt pressure to upper tread rollers.
Tangents:	1'-0" both ends on 90°; 1'-6" both ends on 45°; 1'-0" both ends on 180°. Tangent roller centers provided on 3" RC.
Take-Up:	Screw type adjustable sheaves provided to maintain belt tension.
Bearings:	End shafts are supported by precision, heavy duty, lubricated, ball bearing units with cast iron housings
Drive Location:	Drive located on outside of curve. Specify left hand tangent length, right hand tangent length and drive location ("left hand drive" or "right hand drive"). Note: Drive hand determined with reference point located at outside of curve. For models slave driven (less drive), specify drive shaft location.
Speed:	60 FPM, constant.
Bed:	7" x 1-1/2" x 12 ga. formed steel channel frame.
Floor Supports:	SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor. Full support required at center of curves with 4'-0" inside radius.
Capacity:	500 lb. total distributed live load.
Motor Drive:	1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor, located at infeed end of curve below bed on 45° and 90° curves; 3/4 HP supplied on all 180° curves.
Roller Chain:	Drive shaft is driven by No. 50 chain.
Special Widths:	Consult factory for pricing of ALL widths not shown.
Electrical Controls:	Optional
	View Technical Drawing — View Catalog Info
Note: This unit is not recommended for accumulating loads.
24 Hour Shipments Include 45°, 90° And 180° Curves

196LRCS Medium Duty Belt Driven Live Roller Curve Spur Conveyor

Specifications:

Belt:	"B" section V-belt.
Tread Rollers:	2-1/2" dia. to 1-11/16" dia. x 14 ga. steel tapered rollers, model 254T; 1.9" dia. x 16 ga. steel straight tangent rollers, model 196S.
Pressure Sheaves:	Provides drive belt pressure to upper tread rollers.
Tangents:	12" opposite spur end on 60/30 unit; 18" opposite spur end on 45/45 unit.
Take-Up:	Screw type adjustable sheave with flat idler sheaves provided to maintain belt tension.
Bearings:	End shafts are supported by precision, heavy duty, lubricated, ball bearing units with cast iron housings
Spur Hand/Drive Location:	Drive located on outside of curve. Specify hand of spur as "left hand" or "right hand" and location of drive specified as "left hand drive" or "right hand drive". NOTE: Drive location determined with reference point located at outside of curve. For models slave driven (less drive), specify drive shaft location.
Belt Speed:	60 FPM, constant.
Bed:	7" x 1-1/2" x 12 ga. formed steel channel frame.
Floor Supports:	SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor.
Capacity:	500 lb. total distributed live load.
Motor Drive:	1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor, located at infeed end of curve below bed.
Roller Chain:	Drive shaft is driven by No. 50 chain.
Electrical Controls:	Optional
	View Technical Drawing — View Catalog Info
Note: This unit is not recommended for accumulating loads.
24 Hour Shipments Include 45/45° & 60/30° Curve Spurs