Line Shaft Driven Conveyors
A line shaft driven conveyor allows curves, spurs, and a variety of units to be driven by a single drive.
- 796LRS Live Roller
- 796LSC Curve
- 796LSX Cross-Over Module
796LS Line Shaft Driven Live Roller
Specifications:
| Tread Rollers: |
1.9" dia. x 16 ga. steel, model 196S grooved. |
| Drive Belt: |
3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive. |
| Drive Shaft: |
1" dia. C1018 cold rolled steel shaft. |
| Couplings: |
Couplings located both ends (type "A"), one end only (type "B" or "C") or none (type "D"). See 'line shaft coupling chart' and specify. |
| Center Drive: |
Reversible drive; located approximately 18" from end of bed section for 3" and 6" RC; 16-1/2" for 4" RC. |
| Bearings: |
Precision, lubricated, ball bearing units with composite housings. |
| Speed: |
60 FPM, constant. |
| Bed: |
7" x 1-1/2" x 12 ga. formed steel channel frame. Bed sections attached with splice plates and floor supports. |
| Floor Supports: |
SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor. |
| Motor Drive: |
1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. |
| Roller Chain: |
Drive shaft is driven by No. 50 chain. Chain take-up provided on motor base. |
| Capacity: |
See technical section for load capacity rating. |
| Electrical Controls: |
Optional |
| |
View Technical Drawing — View Catalog Info |
| 24 Hour Shipments Include All 1-Foot Increments 2'- 0" TO 100'- 0" |
796LSC Line Shaft Driven Curve Module
Specifications:
| Tread Rollers: |
2-1/2" dia. to 1-11/16" dia. x 14 ga. steel tapered rollers, model 254T. |
| Drive Belt: |
3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive. |
| Drive Shaft: |
1" dia. C1018 cold rolled steel shaft, located on inside radius. Note: Spools are keyed to provide positive drive (designed not to slip on drive shaft). |
| Couplings: |
Couplings located both ends (type "A") or one end only (type "B" or "C"). See 'line shaft curve couplings' and specify. |
| Tangents: |
1'-0" both ends on 60° and 90°; 1'-6" both ends on 30° and 45°. 1'-0" infeed, 1'-0" discharge and no center tangent on 180°. Tangent roller centers 3" RC. |
| Bearings: |
Precision, lubricated, ball bearing units with steel housings. 6 per 90° and 60° curve; 4 per 45° and 30°. |
| Universal Joints: |
4 per 90° and 60° curve; 2 per 45° and 30° curve. |
| Bed: |
7" x 1-1/2" x 12 ga. formed steel channel frame. |
| Floor Supports: |
SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor. |
| Motor Drive: |
Driven by 796LS. |
| |
View Technical Drawing — View Catalog Info |
| 24 Hour Shipments Include 30°, 45°, 60° And 90° Modules |
796LSX Line Shaft Cross-Over Module
Specifications:
| Tread Rollers: |
1.9" dia. x 16 ga. steel, model 196S grooved. |
| Drive Belt: |
3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive. |
| Drive Shaft: |
1" dia. C1018 cold rolled steel shaft. |
| Couplings: |
Couplings located both ends or one end only. Specify where couplings required. |
| Bearings: |
Precision, lubricated, ball bearing units with composite housings. |
| Speed: |
60 FPM, constant. |
| Bed: |
7" x 1-1/2" x 12 ga. formed steel channel frame. |
| Floor Supports: |
SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor. |
| Motor Drive: |
1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. |
| Cross Over Direction: |
Specify "cross over to right hand" or "cross over to left hand". |
| Electrical Controls: |
Optional |
| |
View Technical Drawing — View Catalog Info |
| 24 Hour Shipments Include All 1-Foot Increments 2'- 0" TO 10'- 0" |