REQUEST A QUOTE

196LRC - Medium Duty Belt Driven Live Roller Curve

196LRC Medium Duty Live Roller Curve
196LRC Medium Duty Belt Driven Live Roller Curve Conveyor
Betling "B" Section V-Belt
Tread Rollers 2-1/2" diameter to 1-11/16" diameter x 14 gague steel tapered roolers, model 254T; 1.9" diameter x 16 gauge steel straight tangent rollers, model 196S.
Pressure Sheaves Provides drive belt pressure to upper tread rollers
Tangents 1'-0" both ends on 90 degree sections; 1'-6" both ends on 45 degree curves; 1'-0" both ends on 180 degree curves. Tanget rollers provided on 3" centers.
Take-Up Screw type adjustable sheaves provided to maintain belt tension
Bearings End shafts are supported by precision, heavy duty, liubricatd ball bearing units with cast iron housings.
Drive Location Drive located on outside of curve. Specify left hand tangent length, right hand tangent length and drive location ("right hand drive" or "left hand drive"). Note: Drive hand determined with reference point located at outside of curve. For models slave driven (less drive), specify drive shaft location.
Speed 60 FPM, constant
Bed 7" x 1-1/2" x 12 gauge channel steel frame, slotted for tread rollers to pop out. When uint is installed at 7'-0" or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.
Capacity 500 lbs total distributed live load
Floor Supports SM-6 supports provide for adjustment between 31-1/2" and 43-1/2" top of roller. Supports should be lagged to the floor.
Motor Drive 1/3 HP, 230V/460V/3PH, 60Hz, ODP right angle gear motor located at infeed end of conveyor for 45 and 90 degree curves. 3/4 HP motor supplied on 180 degree curve sections
Roller Chain Drive shaft is driven by Number 50 roller chain.
External Controls Optional
 View technical drawings - View catalog info
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 hour shipments for 45, 90, and 180 degree curves

Our Hours

  • Monday - Friday
      8:00AM to 5:00PM EST
  • Saturday & Sunday
      Closed

Store Location

Feel free to contact us if you have any problems.

  • Address
      3501 Detroit Ave, Cleveland, OH 44113
  • Phone
      844-863-4542