251CALR - Heavy Duty Cam Adjusted Belt Driven Live Roller Conveyor

251CALR Heavy Duty Belt Driven Cam Adjusted Live Roller Conveyor
251CALR Heavy Duty Belt Driven Cam-Adjusted Live Roller Conveyor
Betling 12" Wide PVC-120
Drive Pulley 8" diameter with 1-7/16" diameter shaft on 15" to 39" between frame dimension models; 12" diameter with 1-15/16" diameter shaft on models above 39" between frame dimension; both are fully lagged and crowned.
Tail Pulley 4" diameter, crowned, with a 1-3/16" diameter shaft on models with 15" to 39" between frame dimension; 6" diameter with 1-7/16" diameter shaft on models above 39" between frame dimension.
Center Drive Reversible drive with integral 24" belt take-up. For units under 8'-0" long, drive units must be stacked. Specify location.
Bearings All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Tread Rollers 2-1/2" diameter x 11 gaguge steel, model 196S
Pressure Rollers 1.9" diameter x 16 gaguge steel, model 196S, cam adjustable. Pressure rollers are same between frame dimension as conveyor for models up to 39" BF. For units over 43" between frame, rollers are 21" between frame with standard 12" wide belt. With optional 24" wide belt, pressure rollers are 27" between frame.
Return Rollers 1.9" diameter x 16 gauge steel, model 196S, adjustable.
Speed 35 FPM, constant
Squaring Rods Adjsutable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on units over 30' long.
Bed 7" x 1-1/2" x 12 gauge channel steel frame, slotted for tread rollers to pop out. When uint is installed at 7'-0" or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.
Floor Supports 8" and 12" center drive, with 4" or 6" end pulley are adjustable from 33" to 36" top of roller with SH-6 support at end plates and SH-7 supports at intermediate locations. Supports are provided on 5' centers.
Motor Drive 1 HP, 230V/460V/3PH, 60Hz, ODP right angle gear motor
Roller Chain Drive pulley is driven by Number 50 roller chain for 1-1/2 HP or less and Number 60 roller chain on larger drives. Chain take-up provided on motor base.
External Controls Optional
 View technical drawings - View catalog info
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 hour shipments for all 1-foot increments between 6'-0" to 100'-0"

Our Hours

  • Monday - Friday
      8:00AM to 5:00PM EST
  • Saturday & Sunday

Store Location

Feel free to contact us if you have any problems.

  • Address
      3501 Detroit Ave, Cleveland, OH 44113
  • Phone