REQUEST A QUOTE

700SBF - Floor to Floor Slider Bed Powered Belt Conveyor

350SBF Slider Bed Belt Floor-To-Floor Conveyor
700SBF Slider Bed Belt Floor-To-Floor Conveyor
Betling PVC-120 Black
Drive Pulley 4" diameter with 1-3/16" diameter shaft or 8" diameter with 1-7/16" diameter shaft; both crowned and fully lagged.
Tail Pulley 4" diameter, crowned, with 1-3/16" diameter shaft
End Drive Allows one-direction (unit) operation; add optional center drive for reversible application
Take-Up Screw type unit at tail pulley provides 12" of belt take-up
Bearings All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Return Rollers 1.9" diameter x 16 gauge steel, model 196S, adjustable.
Belt Speed 60 FPM, constant
Bed 3-1/2" x 1-1/2" x 10 gauge channel frame with 14 gauge slider bed.
Nose-Over Provides smooth transition from incline to horizontal position. Single-nose over adjusts 0 to 20 degrees; double nose-over adjuusts from 0 to 35 degrees (specify single or double)
Floor Supports Optional
Motor Drive 1/3 HP, 230V/460V/3PH, 60Hz, ODP right angle gear motor
Roller Chain Drive pulley is driven by Number 50 roller chain for 1-1/2 HP or less and Number 60 roller chain on larger drives. Chain take-up provided on motor base.
External Controls Optional
 View technical drawings - View catalog info
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 hour shipments for all 1-foot increments between 5'-0" to 100'-0"

Our Hours

  • Monday - Friday
      8:00AM to 5:00PM EST
  • Saturday & Sunday
      Closed

Store Location

Feel free to contact us if you have any problems.

  • Address
      3501 Detroit Ave, Cleveland, OH 44113
  • Phone
      844-863-4542