725TB - Trough Bed Powered Belt Conveyor

250TB Trough Bed Conveyor
725TB Trough Bed Belt Conveyor
Betling PVC-120 Black
Drive Pulley 4" diameter with 1-3/16" diameter shaft or 8" diameter with 1-7/16" diameter shaft; both crowned and fully lagged.
Tail Pulley 4" diameter, crowned, with 1-3/16" diameter shaft
End Drive Allows one-direction (unit) operation; add optional center drive for reversible application
Take-Up Screw type unit at tail pulley provides 12" of belt take-up
Bearings All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
Return Rollers 1.9" diameter x 16 gauge steel, model 196S, adjustable.
Belt Speed 60 FPM, constant
Bed 3-1/2" deep x 12 gauge box typ bed with bed pan braces (all widths) and wtih 2-1/2" deep x 12 guage formed trough with formed flanges on sides to provide extra stregth.
Floor Supports SM-6 with 4" diameter end drive, adjustable from 31-3/4" to 40-1/4" Top of Belt. SM-6 with 8" diameter end drive pulley, adjustable from 33-3/4" to 40-1/4" Top of Belt. Supports provided at both ends and at each bed joint. Support should be lagged to the floor.
Motor Drive 1/3 HP, 230V/460V/3PH, 60Hz, ODP right angle gear motor
Roller Chain Drive pulley is driven by Number 50 roller chain for 1-1/2 HP or less and Number 60 roller chain on larger drives. Chain take-up provided on motor base.
External Controls Optional
 View technical drawings - View catalog info
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 hour shipments for all 1-foot increments between 5'-0" to 100'-0"

Our Hours

  • Monday - Friday
      8:00AM to 5:00PM EST
  • Saturday & Sunday

Store Location

Feel free to contact us if you have any problems.

  • Address
      3501 Detroit Ave, Cleveland, OH 44113
  • Phone