796LS - Line Shaft Driven Live Roller Conveyor

796LS Line Shaft Driven Live Roller Conveyor
796LS Line Shaft Driven Live Roller Conveyor
Tread Rollers 1.9" x 16 gauge steel, model 196S grooved
Drive Belt 3/16" diameter polyurehtane belts. Nominal 15 lbs per roller drive pressure.
Drive Shaft 1" diameter C1018 cold rolled steel shaft
Couplings Couplings located both ends (type "A"), one end only (type "B" or type "C") or none (type "D"). See 'line shaft coupling chart' and specify.
Center Drive Reversible drive; located approximately 18" from end of bed section for 3" and 6" roller cetners; 16-1/2" for 4" roller centers.
Bearings Precision, lubricated, ball bearing units with composite housings
Speed 60 FPM, constant
Bed 7" x 1-1/2" x 12 gauge channel steel frame, slotted for tread rollers to pop out. Bed sections attached with couplings and floor supports.
Floor Supports SM-6 supports adjustable from 31-1/2" to 43-1/2" top of roller. Supports should be lagged to the floor.
Motor Drive 1/3 HP, 230V/460V/3PH, 60Hz, ODP right angle gear motor
Roller Chain Drive pulley is driven by Number 50 roller chain. Chain take-up provided on motor base.
External Controls Optional
 View technical drawings - View catalog info
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 hour shipments for all 1-foot increments between 2'-0" to 100'-0"

Our Hours

  • Monday - Friday
      8:00AM to 5:00PM EST
  • Saturday & Sunday

Store Location

Feel free to contact us if you have any problems.

  • Address
      3501 Detroit Ave, Cleveland, OH 44113
  • Phone