796LSC - Line Shaft Driven Live Roller Conveyor Curve

796LSC Line Shaft Curve Conveyor
796LSC Line Shaft Driven Curve Conveyor Module

BearingsPrecision, lubricated, ball bearing units with steel housings. 6 per 90 and 60 degree curve; 4 per 45 and 30 degree curve.

Tread Rollers 2-1/2" diameter to 1-11/16" diameter x 14 gague steel tapered roolers, model 254T.
Drive Belts 3/16" diameter polyurehtane belts. Nominal 15 lbs per roller drive pressure.
Drive Shaft 1" diameter C1018 cold rolled steel shaft. Note: spools are keyed to provide positive drive (designed not to slip on the shaft).
Couplings Couplings located both ends (type "A") or one end only (type "B" or type "C"). See 'line shaft coupling chart' and specify.
Tangents 1'-0" both ends on 60 and 90 degree units; 1'-6" both ends on 30 and 45 degree units. 1'-0" infeed and discharge, no center tangent on 180 degree model. Tangent rollers at 3" centers.
Universal Joints 4 per 60 and 90 degree curve; 2 per 45 and 30 degree curve
Bed 7" x 1-1/2" x 12 gauge channel steel frame, slotted for tread rollers to pop out. When uint is installed at 7'-0" or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.
Floor Supports SM-6 supports provide for adjustment between 31-1/2" and 43-1/2" top of roller. Supports should be lagged to the floor.
Motor Drive Driven by 796LS conveyor
 View technical drawings - View catalog info
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 hour shipments for 30, 45, 60, and 90 degree curve modules

Our Hours

  • Monday - Friday
      8:00AM to 5:00PM EST
  • Saturday & Sunday

Store Location

Feel free to contact us if you have any problems.

  • Address
      3501 Detroit Ave, Cleveland, OH 44113
  • Phone