REQUEST A QUOTE

796LSX - Line Shaft Driven Live Roller Conveyor Cross Over

796LSX Line Shaft Cross Over Module
796LSX Line Shaft Cross Over Module
Tread Rollers 1.9" diameter x 16 gauge steel, model 196S grooved.
Drive Belts 3/16" diameter polyurehtane belts. Nominal 15 lbs per roller drive pressure.
Drive Shaft 1" diameter C1018 cold rolled steel shaft.
Couplings Couplings are located at both ends or one end only. Specify where couplings are required.
Bearings Precision, lubricated, ball bearing units with steel housings. 6 per 90 and 60 degree curve; 4 per 45 and 30 degree curve.
Speed 60 FPM, constant
Bed 7" x 1-1/2" x 12 gauge channel steel frame
Floor Supports SM-6 supports provide for adjustment between 31-1/2" and 43-1/2" top of roller. Supports should be lagged to the floor.
Motor Drive 1/3 HP, 230V/460V/3PH, 60Hz, ODP right angle gear motor
Roller Chain Drive pulley is driven by Number 50 roller chain. Chain take-up provided on motor base.
Cross Over Direction Specify "cross over to right hand" or "cross over to left hand"
 View technical drawings - View catalog info
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 hour shipments for all 1-foot increments between 2'-0" to 10'-0"

Our Hours

  • Monday - Friday
      8:00AM to 5:00PM EST
  • Saturday & Sunday
      Closed

Store Location

Feel free to contact us if you have any problems.

  • Address
      3501 Detroit Ave, Cleveland, OH 44113
  • Phone
      844-863-4542