Our Model RBI makes moving parcels, crates, packages, and other material between floors a breeze. It is equipped with an adjustable double nose-over at the discharge end to ensure a smooth transfer from the inclined plane to the horizontal plane. This conveyor is sometimes used as a booster in a gravity conveyor system.
Black Trackmate 120 rough-top with PVC cover, clipper lacing
8″ diameter with 1-7/16″ diameter shaft at bearings, machine crowned and fully lagged.
4″ diameter with 1″ diameter shaft at bearings or 6″ diameter with 1-3/16″ diameter shaft at bearings, machine crowned.
Roller bed with 1.9″ diameter x 16 ga. galvanized tube rollers spaced every 6″. Mounted in 6-1/2″ x 12 ga. powder-coated formed-steel channel frames. Standard 4′, 6′, 8′, and 10′ long bed sections bolt together with splice plates.
Located on the incline section. The chain guard is located on the left-hand side.
Take-ups in the center-drive provide 16″ of belt take-up.
Sealed, pre-lubricated, self-aligning ball bearings on drive and tail pulleys
Adjustable 2-1/8″ diameter roller. Pre-lubricated ball bearings, guards included.
Adjustable 1.9″ diameter rollers, pre-lubricated ball bearings
65 FPM constant, standard
1HP – 207/230/460/575V, 3PH, 60Hz Totally Enclosed C-Face “SSB” Brake Motor (6 ft. / lb.)
Sealed worm gear C-Face speed reducer.
No. 50 roller chain to drive pulley
Optional
Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop-out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
Enter your name and email address to subscribe to our newsletter featuring the latest in material handling and storage solutions (opt out at anytime).
