Menu

190-E24EZ Zoned Accumulation Conveyor

Series Specifications

Bed

Roller bed with 1.9″ diameter roller x 16 gauge galvanized tube bearings spaced every 3″. Mounted in 6 1/2 in x 12 ga. powder painted formed steel channel frame bolted together with splice plates.

Motor

24 VDC motor with integrated motor control card. One in each zone of conveyor mounted on inside of BR.

Slave O-Rings

3/16″ diameter polyurethane o-rings slave-drive zone tread rollers from motor.

Accumulation Zones

18″, 24″, 30″ and 36″ zones available.

Set Low Channel

Added additional flanges to make the installation and removal of the optional cover simple.

EZLogic® Zone Controller

Located in each zone. (Retro-reflective). NEMA 1, 2, IP 62. UL Approved.

Power Supply (Motors)

40 amp DC power supply, 24 volt fixed output. Maximum of 40 zones per power supply. 120 vac, 24 amp input. Mounted near center of conveyor.

IOP

Provides 27VDC, 100 watt power for EZLogic® accumulation system – contains slots for 4
input/output boards. Operates up to 50 zones with maximum of 25 on either side of IOP. Requires
120VAC or 230VAC single phase input.

Speed

25 – 125 FPM, set on integrated motor control card.

Capacity

Maximum load of 37 pounds per foot, 75 pounds per zone.

Floor Supports

Supplied as optional equipment.

Technical Drawings

190-E24EZ Zoned Accumulation Conveyor

Share on facebook
Share on twitter
Share on linkedin
Share on email