297CDLR – Heavy Duty Chain Driven Live Roller Conveyor

Model 297CDLR is specifically designed to transport heavy loads such as tote pans, castings, drums, pallet loads, etc. It is especially suited for carrying loads in the presence of oil and other such contaminates. This chain-driven live roller includes 7 gauge tread rollers and structural steel frame as standard unit features.

Series Specifications

Tread Rollers

2-9/16″ diameter x 7 gauge steel rollers, model 297S with sprockets.

Chain Drive

Roll-to-roll with No. 60 roller chain.

Roller Centers

3″, 4-1/2″, 6″, 9″, and 12″

Center Drive

Reversible drive either side mounted or underside mounted (specify). The main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.


Precision ABEC bearings.

Chain Guard

The chain drive is completely enclosed along the entire length of the conveyor.


4” at 5.4 lbs. and 6” at 8.2 lbs. structural steel channel frame. Bed sections attached with couplings and floor supports.

Motor Drive

3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.


35 FPM constant, standard

Bed Lengths
(4-1/2" or 9" Roller Centers)

Intermediate bed section lengths 3’-0”, 3’-9”, 4’-6”, 5’-3”, 6’-0”, 6’-9”, 7’-6”, 8’-3”, 9’-0” and 9’-9” increments. Minimum overall conveyor length with drive 5’-3”. Maximum overall conveyor length: 58’-6” with 4-1/2” RC; 78’-0” with 9” RC.

Bed Lengths
(3", 6", or 12" Roller Centers)

Intermediate bed section lengths are available in 1’-0” increments. Minimum overall conveyor length with drive 5’-0”. Maximum overall conveyor length 80’-0”.


Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop-out roller (other stationary equipment will require proper guarding and safety devices supplied by others).

External Controls


Technical Drawings

297CDLR Chain Driven Live Roller Conveyor
Share on facebook
Share on twitter
Share on linkedin
Share on email