ABEZ Live Roller Zero Pressure Accumulation Conveyor

Series Specifications


6 in. Black TMPH90MF0XB.


Roller bed with 1.9″ diameter roller x 16 gauge galvanized tube spaced every 3″. Mounted in 6-1/2″ x 12 gauge powder painted formed steel channel frame bolted together with butt coupling.

Cross Bracing

Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure correct product tracking. Supplied to section adjoining drive and every other section, 20′ bed lengths and over. Supplied on bed lengths 9′ and over.

Center Drive

Can be placed in any section of conveyor 7’-6” or longer. Center drive is 18 in. OAW on all widths.

Drive Pulley

8″ diameter with 1-7/16″ diameter shaft at bearings.

Tail Pulley

4″ diameter with 1-7/16″ diameter shaft at bearings, machine crowned.

Take-Up Pulley

6″ diameter with 1-3/16″ diameter shaft at bearings, machine crowned.

Snub Idler

Adjustable 2-1/8″ diameter pre-lubricated ball bearings.

Return Idler

Adjustable 1.9″ diameter pre-lubricated ball bearings.


Take-ups in center drive. Provides 16″ of belt take-up.


Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys. Pre-lubricated ball bearings in tread and pressure rollers.

Accumulation Zones

12, 18, 24, 30 and 36 in. long air controlled. Includes 4 brake rollers to stop package. Section lengths change with zone lengths. Note: 51 or more zones will require an additional IOP, isolation cable and power supply T cable

EZLogic Zone Controller

Located in each zone. (Retro-reflective). NEMA 1, 2, IP 62. UL Approved.


Provides 27VDC, 100 watt power for EZLogic® accumulation system – contains slots for 4 input/output boards. Operates up to 50 zones (25 each side of IOP). Requires 120VAC or 230VAC single phase input.

Air Requirements

Recommended working pressure 35 P.S.I. Free air consumption at 35 P.S.I.– .003 cu. ft. per sensor actuation.

Filter, Regulator

One filter/regulator is supplied for the main air supply line. (3/8 inch NPT port). Main air from compressor should be supplied to each filter/regulator.

Speed Reduction

Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive shaft.


1/2 HP–208/230/460/575V–3 Ph. 60 Hz. Totally Enclosed C-Face.

Conveying Speed

Constant 65 FPM.


Maximum load per linear foot of conveyor 75 lbs. Total load NOT TO EXCEED capacity in charts.

Floor Supports

Supplied as optional equipment.

Technical Drawings

ABEZ Zero Pressure Accumulation Conveyor

Share on facebook
Share on twitter
Share on linkedin
Share on email