REQUEST A QUOTE

196LRCS - Medium Duty Live Roller Spur Curve Section

196LRCS Medium Duty Live Roller Curve Spur
196LRC Medium Duty Belt Driven Live Roller Curve Spur Conveyor
Betling "B" Section V-Belt
Tread Rollers 2-1/2" diameter to 1-11/16" diameter x 14 gague steel tapered roolers, model 254T; 1.9" diameter x 16 gauge steel straight tangent rollers, model 196S.
Pressure Sheaves Provides drive belt pressure to upper tread rollers
Tangents 12" opposite spur end on 60/30 unit; 18" opposite spur end on 45/45 unit
Take-Up Screw type adjustable sheaves provided to maintain belt tension
Bearings End shafts are supported by precision, heavy duty, liubricatd ball bearing units with cast iron housings.
Spur Hand / Drive Location Drive located on outside of curve. Specify hand of spur as "left hand" or "right hand" and location of drive specified as "left hand drive" or "right hand drive". Note: Drive hand determined with reference point located at outside of curve. For models slave driven (less drive), specify drive shaft location.
Speed 60 FPM, constant
Bed 7" x 1-1/2" x 12 gauge channel steel frame, slotted for tread rollers to pop out. When uint is installed at 7'-0" or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.
Capacity 500 lbs total distributed live load
Floor Supports SM-6 supports provide for adjustment between 31-1/2" and 43-1/2" top of roller. Supports should be lagged to the floor.
Motor Drive 1/3 HP, 230V/460V/3PH, 60Hz, ODP right angle gear motor located at infeed end of conveyor for 45 and 90 degree curves. 3/4 HP motor supplied on 180 degree curve sections
Roller Chain Drive shaft is driven by Number 50 roller chain.
External Controls Optional
 View technical drawings - View catalog info
Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
24 hour shipments for all 45/45 degree and 60/30 degree spurs

Our Hours

  • Monday - Friday
      8:00AM to 5:00PM EST
  • Saturday & Sunday
      Closed

Store Location

Feel free to contact us if you have any problems.

  • Address
      3501 Detroit Ave, Cleveland, OH 44113
  • Phone
      844-863-4542