25-CRR Heavy Duty Chain-Driven Live Roller Conveyor

Series Specifications


Roller bed with 2-1/2″ diameter x 11 gauge unplated tread rollers spaced every 4″ with No. 40
roller chain; 5″ with No. 50 roller chain. No. 60 roller chain used on 3″, 3-3/4″, 6″, and 7-1/2″ roller centers only. Tread rollers mounted in 4″ x 4 gauge powder painted formed steel channel on side opposite chain guard and 6″ x 4 gauge powder painted formed steel channel on chain guard side. NOTE: 3″ roller center tread rollers mounted in 4″ channel each side.

Center Drive

Can be placed in any section of conveyor length, specify. Chain guard located on left hand side.

Drive Chain

No. 40, 50 or 60 roller chain.

Chain Guard

Formed steel, upper and lower chain guard mounted to top and bottom of channel frame to totally enclose drive chains.


Sealed, pre-lubricated ball bearings.

Speed Reduction

Sealed worm gear C-Face speed reducer.


1 HP–208/230/460/575V–3 Ph. 60 Hz. Premium Energy Efficient C-Face.


30 FPM, constant.


Maximum load per linear foot of conveyor 300 lbs. with supports on 10 ft. centers, 1000 lbs. with supports on 5 ft. centers. Contact factory for capacity of No. 40 chain, 4 in. roller centers.

Floor Supports

Supplied as optional equipment.

Technical Drawings

25-CRR Heavy-Duty Chain-Driven Live Roller

Share on facebook
Share on twitter
Share on linkedin
Share on email