REQUEST A QUOTE

AIMCO Manufacturing

AIMCO Manufacturing

Conveyer & Caster partners with AIMCO Manufacturing to solve challenging material handling problems. AIMCO Manufacturing is a leading manufacturer of material handling equipment like: articulated jib cranes, industrial manipulators, machine loaders, and custom end effectors. Their industrial lift assist system helps enhance operator safety, protect sensitive materials, reduce operator fatigue, increase productivity and throughput, all while reducing overall labor expense.

AIMCO Manufacturing was founded in 1993 to provide industrial manipulators directly to automotive manufacturing. Through a process of continuous design improvement AIMCO's product has grown out of it's niche and is utilized in many industrial applications. Today AIMCO products area helping production processes in the United States, Mexico, Canada, China, and Taiwan.


AIMCO Manufacturing - Articulating Jib

AIMCO Articulated Jib cranes are widely considered the finest available.

AIMCO Manufacturing - Articulating Jib
The Articulating Jib's end of arm can accommodate a wide range of hoists, balancers, rigid-lifters, end effectors, and tool-plates.

Features & Benefits

Max Reach 15 feet
Max Capacity 1,625 lbs at 8' reach
Benefits Increase productivity
Reduce operator fatigue
Protect delicate payloads
Reduce workplace injuries

AIMCO Manufacturing - Articulating Jib + Torque Arm

The AIMCO torque arm bridges the gap between a hoist and a manipulator.

AIMCO Manufacturing - Articulating Jib + Torque Arm
The torque arm provides a rigid ''load arm'' between the work piece and the crane, allowing off-center loads to be securely transported and manipulated without a loss of required product orientation.

Features & Benefits

Benefits Off-center load compensation
Easy machine loading & unloading
Manipulation of loads
No seesaw effect
Powered with plant air
Diverse control packages and safeties

AIMCO Manufacturing - Articulating Jib + Rigid Lift

Best served in work cells with low ceilings, the Articulated Jib Crane + Rigid Lifting Carriage can be supplied with an INVERTED secondary arm.

AIMCO Manufacturing - Articulating Jib + Rigid Lift
This configuration provides the ultimate low headroom system, virtually extending the work envelope from the floor to the ceiling.

Features & Benefits

Moment Load Capacity 750 ft-lbs
Vertical Lift Up to 10 feet
Benefits Flexible device lift integration
Continuous 360° vertical axis rotation
Air & electric hoist compatibility
Hand chain hoist available

AIMCO Manufacturing - Articulated Numo Arm

Maximize end-of-arm clearance and minimize end-of-arm weight.

AIMCO Manufacturing - Articulated Numo Arm
Eliminates hoist ''stack-up'' by nesting the balancer at the second knuckle of the arm. Cables are routed through the arm.

Features & Benefits

Capacity 115 lbs to 577 lbs
Reach Up to 15 feet
Benefits Infinite float mode
Proportional controls
Ideal for low headroom applications
Smooth lift & lower

AIMCO Manufacturing - Articulated VacuJib

Double 360° continuous rotation vacuum hoist system.

AIMCO Manufacturing - Articulated VacuJib
Standard models are available with up to 15 feet of radial reach. Standard options include a Pump Mount and a Portable Base. AIMCO’s VacuJib can be mounted on a free standing pedestal, existing building column, machine, overhead ceiling structure, or a manipulator platform.

Features & Benefits

Capacity 70 lbs to 270 lbs
Radial Reach Up to 15 feet
Benefits 1" and 2" diameter flow paths
Universal tube lifter connections
Custom end effectors
Patent pending technology

AIMCO Manufacturing - Articulated Lifting Arm

Articulated Lifting Arms are ideal for load manipulation in low-headroom applications.

AIMCO Manufacturing - Articulated Lifting Arm
The ''ALA'' lifting systems were developed for part/rack transfer on overhead moving conveyor lines. The simplicity of design, reliability, and value has helped it find success in a diverse set of applications

Features & Benefits

Lifting Capacity Up to 500 lbs
Radial Reach 6' to 11'
Vertical Travel 18" to 60"
Pneumatics Soft-Start cylinders provide smooth handling

AIMCO Manufacturing - Torque Arm

The Torque Arm bridges the gap between a hoist and a traditional manipulator.

AIMCO Manufacturing - Torque Arm
The Torque Arm provides a rigid ''load arm'' between the work piece and the crane. This allows loads to be handled and manipulated securely.

Features & Benefits

Vertical Lift Control Two button, speed metered
Vertical Travel Up to 60 inches
Capacity up to 1,000 lbs
Benefits Wrist swivel for tool & payload positioning
359° rotation, limited by air coil wrap around
Idea for off-center loads
Allows for reach-in handling

AIMCO Manufacturing - Rigid Carriage Lift

The RCL is a rigid lift system that provides maximum lift in areas where headroom is at a premium.

AIMCO Manufacturing - Rigid Carriage Lift
The Model RCL Rigid Carriage Lift is designed for use in hard-to-work, low headroom environments.

Features & Benefits

Vertical Travel Up to 10 feet
Capacity Up to 250 lbs at 36" reach-out
Benefits Controls set at ergonomic height throughout use
Designed for off-center loads
Uses a patented pneumatic overload circuit

AIMCO Manufacturing - Mechanical Grab

Incorporating pneumatic power to clamp or encapsulate a part for safe handling.

AIMCO Manufacturing - Mechanical Grab
The Mechanical Grab series is custom designed to fit customer specifications and parts to tilt, rotate, invert, or simply pick & place.

Features & Benefits

Load Rated & Tested up to 1,000 lbs
Applied Grip Force 100 Lbf to 4,000 Lbf
Grippers Outside and inside diameter grippers available
Power 90 PSI, clean, dry, oil-free air. A filter-regulator between plant air and equipment is recommended.

AIMCO Manufacturing - Vacuum Grab

Vacuum grabs are perfect for moving and manipulating wide, flat products like sheet metal, glass, and plywood.

AIMCO Manufacturing - Vacuum Grab
AIMCO’s Vacuum Grab End Effectors utilize venturi vacuum systems powered by plant compressed air. Venturi systems are ideal for applications where the surface of the product is non-porous.

Features & Benefits

Capacity up to 1,000 lbs
Benefits Vacuum blow-off
"Loss of Air" safety system
Quiet operation
Custom cup configuration
Optional part manipulation

AIMCO Manufacturing - Magnet Grab

Great for fast product engagement and quick release. This series of end tooling makes picking of jumbled parts easy and efficient.

AIMCO Manufacturing - Magnet Grab
Magnetic part holding is a good solution for carbon steel product with various part features such as scattered holes and/or complex surfacing.

Features & Benefits

Capacity up to 1,000 lbs
Requirement Ferrous products only
Benefits Custom mounting configurations
Integration with IMI magnets
Custom cup configuration
Optional part manipulation

AIMCO Manufacturing - Auto Clamp / Unclamp Unit (ACU)

Quickly and easily clamp and handle parts.

AIMCO Manufacturing - Auto Clamp / Unclamp Unit (ACU)
AIMCO offers a new variety of custom end tooling, to allow for automatic clamping and unclamping of parts for quick, easy and accurate part handling.

Features & Benefits

Capacity up to 200 lbs
Benefits Ergonomically optimal button-less control system
Great for rapid pick and place applications
Can be integrated with various lifting devices
Several up/down controllers to choose from
Structurally designed to a 5:1 safety factor

AIMCO Manufacturing - Ergo Handles

Reduce bending, maintain comfort, and improve safety for operators.

AIMCO Manufacturing - Ergo Handles
AIMCO's ergonomic handlebars allow for safety in applications with vertical strokes greater than 48 inches

Features & Benefits

Optional Vertical slide handles available
Pivoting handles available
Custom holsters available
Benefits Integrates with up/down pendants
Infinite float mode for select devices
Enhanced safety and reduced fatigue

Our Hours

  • Monday - Friday
      8:00AM to 5:00PM EST
  • Saturday & Sunday
      Closed

Store Location

Feel free to contact us if you have any problems.

  • Address
      3501 Detroit Ave, Cleveland, OH 44113
  • Phone
      844-863-4542