Caster Mounting – Part 3 – Grip Neck (Wood) Stems
A Grip Neck or Wood Stem, as the name implies, is ideal for equipment made of wood. The design and function of the stem are
Menu
A Grip Neck or Wood Stem, as the name implies, is ideal for equipment made of wood. The design and function of the stem are
A threaded stem is quite simple, it’s a round piece of metal with a cut thread, as the name implies. The threaded stem is more
Grip ring stems are quite possibly the most common caster stem in use. Used predominately in consumer and commercial office and shop equipment, this stem
For as much importance that is stressed on the choice of wheel materials, sometimes, bearing selection doesn’t get a fair shake. The right bearing can
A question came into the office from one of our remote salespeople that peaked some interest. The customer had asked about damaged pallet rack. They are
We hear this a lot. It’s an odd material, looks like plastic, has the strength of cast iron and the absorbency of a nice cotton towel. You
In most situations, standard casters, like our institutional, industrial and kingpinless line provide adequate maneuverability. But, when hitting your mark is more important than anything else, super maneuverable casters are required. A tri-swivel
It is. Well, the word at least, it doesn’t appear in Websters. But that’s okay. For the longest time, swivel casters were made of three
